AMBIENT LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure described below is for the LHD vehicles.

  • Use the same procedure as for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT ARMREST BASE UPPER PANEL (for Driver Side)

    Click here

  2. REMOVE FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)

    Click here

  3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

    A001WM5C01
    *a Clamp
    *b Guide

    1. Using a clip remover, disengage the clamp and guides to disconnect the wire harness.

    2. Remove the 2 screws.

    3. Disengage the claws to remove the No. 1 interior illumination light assembly.