GLOVE BOX LIGHT INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure described below is for the LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    1. A001VE7C01
      B00495X Turn

      Turn the glove box light assembly as shown in the illustration and install it.

  2. INSTALL NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

    Click here

  3. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

    Click here

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  8. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here