ROOM LIGHT REMOVAL

PROCEDURE

1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

   
   
   1. 

      *a	Protective Tape
      	Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the room light lens as shown in the illustration.

   2. 

      *a	Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the room light housing from the roof headlining.

   3. 

      *a	Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guide to remove the room light housing from the room light switch base.

2. REMOVE NO. 2 ROOM LIGHT BULB

   
   

   1. 

      	Remove in this Direction (1)
      	Remove in this Direction (2)

      Remove the No. 2 room light bulb as shown in the illustration.