ELECTRICAL KEY OSCILLATOR(for Rear Floor) REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here

  2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  3. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  4. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Peel back the front floor carpet assembly to the extent that the No. 2 indoor electrical key antenna assembly can be removed.

    2. A005P7VC01
      B00497S Remove in this Direction

      Disconnect the connector.

    3. Using a clip remover, disengage the clamp to remove the No. 2 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.