ELECTRICAL KEY OSCILLATOR(for Front Floor) REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A001UFEC01
      B00497S Remove in this Direction

      Disconnect the connector.

    2. Using a clip remover, disengage the clamp to remove the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.