DATA LIST
Note
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Ignition switch ACC signal | OFF or ON | ON: Ignition switch ACC OFF: Ignition switch off |
- |
| IG SW | Ignition switch ON signal | OFF or ON | ON: Ignition switch ON OFF: Ignition switch off |
- |
| RR Door Courtesy SW | Rear door courtesy light switch assembly RH signal | OFF or ON | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
- |
| RL Door Courtesy SW | Rear door courtesy light switch assembly LH signal | OFF or ON | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
- |
| Back Door Courtesy SW | Back Door Courtesy SW | OFF or ON | ON: Back door open OFF: Back door closed |
- |
| FR Door Lock Pos | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
*1, *2, *3 |
| FR Door Courtesy SW | Front door courtesy light switch assembly RH signal | OFF or ON | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch assembly LH signal | OFF or ON | ON: Front door LH open OFF: Front door LH closed |
- |
| RR-Door Lock Pos SW | Rear door RH and LH unlock detection switch signal | OFF or ON | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
*4, *5 |
| RL-Door Lock Pos SW | Rear door RH and LH unlock detection switch signal | OFF or ON | ON: Rear door RH or LH unlocked OFF: Rear door RH and LH locked |
*4, *5 |
| Interior Light Control | Operation of the illuminated entry system | OFF or ON | Customized value is displayed | - |
| I/L ON W/Door Key Unlock | Function that lights up the interior lights when the doors are unlocked | OFF or ON | Customized value is displayed | - |
| Lighting Time | Lighting time of the delay control function (illuminated entry system) | 15 s, 7.5 s or 30 s | Customized value is displayed | - |
| Room Light when Aprchd | Function that lights up the interior lights when a key enters any actuation area | OFF or ON | Customized value is displayed | - |
| I/L when ACC OFF | Function that lights up the interior lights when the ignition switch is turned from ACC or IG to off | OFF or ON | Customized value is displayed | - |
| Light Control | Function that lights up the ambient lights (while driving) | OFF or ON | Customized value is displayed | - |
| Interior Illumination Light | Function that lights up the ambient lights (always) | OFF or ON | Customized value is displayed | - |
*1: for RHD
*2: for LHD with Entry and Start System
*3: for LHD with Double Locking System
*4: w/ Entry and Start System
*5: w/ Double Locking System
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Illuminated Entry System | Turns on the lights that are controlled by the illuminated entry system*1 | ON or OFF | Perform the Active Test with door switch in the map light assembly turned on. |
| Relay for Interior Light Auto Cut Function | DOME CUT relay | ON or OFF |
|
| Interior Illumination Light1 |
|
ON or OFF | Preconditions for using the Active Test to check dimmer controlled illumination:
|
| Interior Illumination Light2 |
|
ON or OFF | Preconditions for using the Active Test to check dimmer controlled illumination:
|
*1: Refer to Description for the lights that are controlled by the illuminated entry system.
*2: w/ Door Ambient Illumination Light
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power/Engine SW Light | Engine switch illumination*1 | OFF or ON | When performing this Active Test, make sure the following condition is met: The engine switch illumination is off (15 seconds or more have elapsed since it turned from on to off) and the engine switch is on (ACC or IG), or the engine is running. |
*1: w/ Entry and Start System