DOOR CONTROL TRANSMITTER(w/ Entry and Start System) INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY


    1. A001TTJC02
      B00497S Install in this Direction

      Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

    2. A001VKCC02
      B00497S Install in this Direction

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    3. A001Y9NC02
      B00497S Install in this Direction

      Insert the mechanical key into the transmitter as shown in the illustration.

    4. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when a switch is pressed.