NETWORK GATEWAY ECU(for RHD) REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

    Click here

  2. REMOVE ECU INTEGRATION BOX LH


    1. A001TUI

      Disconnect the 5 connectors as shown in the illustration.

    2. A001SO0C01
      *a w/ Stop and Start System

      Disconnect the connector.

    3. w/ Stop and Start System:


      1. Disconnect the 3 connectors.

    4. A001X55

      Remove the bolt, nut and ECU integration box LH.

  3. REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)


    1. Disengage the claws to remove the central gateway ECU (network gateway ECU).

      A001U2G

      Note


      • If the ECU integration box LH is deformed or damaged, replace it.

      • Do not bend the claws more than necessary.