NETWORK GATEWAY ECU(for LHD) REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

    Click here

  2. REMOVE ECU INTEGRATION BOX RH


    1. A001W03C04
      *a w/ Smart Key System
      *b w/ Stop and Start System

      Disconnect the connector.

    2. w/ Smart Key System:


      1. Disconnect the 3 connectors.

    3. w/ Stop and Start System:


      1. Disconnect the 3 connectors.

      2. Using a clip remover, disengage the wire harness clamp.

    4. Using a clip remover, disengage the wire harness clamps.

    5. A001SC3

      Remove the bolt, 2 nuts and ECU integration box RH.

  3. REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)


    1. Disengage the claws to remove the central gateway ECU (network gateway ECU).

      A001SKQ

      Note


      • If the ECU integration box RH is deformed or damaged, replace it.

      • Do not bend the claws more than necessary.