DOOR CONTROL TRANSMITTER(w/ Entry and Start System) REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER BATTERY


    1. A001SDYC02
      *a Release Hook Knob
      B00497S Remove in this Direction

      Slide the release hook knob to remove the mechanical key as shown in the illustration.

    2. A001ULYC02
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

      Note

      Do not use excessive force when prying apart the transmitter housing cover.

    3. A001WR2C02
      *a Protective Tape
      B00497S Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.