ULTRASONIC SENSOR(for Front) REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001TZ7

      Disconnect the connector.

    2. A005OMMC01
      B00497S Remove in this Direction

      Disengage the claws to remove the front side ultrasonic sensor as shown in the illustration.

  3. REMOVE FRONT CORNER ULTRASONIC SENSOR

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001T1C

      Disconnect the connector.

    2. A005Q1BC01
      B00497S Remove in this Direction

      Disengage the claws to remove the front corner ultrasonic sensor as shown in the illustration.

  4. REMOVE FRONT CENTER ULTRASONIC SENSOR

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001SHD

      Disconnect the connector.

    2. A005PD7C01
      B00497S Remove in this Direction

      Disengage the claws to remove the front center ultrasonic sensor as shown in the illustration.

  5. REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

    Tech Tips


    • Perform this procedure only when replacement of the front side ultrasonic sensor retainer is necessary.

    • When removing the front side ultrasonic sensor retainer, heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light.

    • The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. Heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

      Heating Temperature
      Item Temperature
      Front Bumper Assembly 40 to 60°C (104 to 140°F)
      Front Side Ultrasonic Sensor Retainer

      CAUTION:


      • Do not touch the heat light and heated parts.

      • Touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      A005OUCC23
      *a Heated Part
      *b Heat Light
    2. A001W7T

      Remove the front side ultrasonic sensor retainer.

  6. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Perform this procedure only when replacement of the front corner ultrasonic sensor retainer is necessary.

    • When removing the front corner ultrasonic sensor retainer, heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light.


    1. Heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

      Heating Temperature
      Item Temperature
      Front Bumper Assembly 40 to 60°C (104 to 140°F)
      Front Corner Ultrasonic Sensor Retainer

      CAUTION:


      • Do not touch the heat light and heated parts.

      • Touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      A005OUCC23
      *a Heated Part
      *b Heat Light

    2. Remove the front corner ultrasonic sensor retainer.

      A001SFD

  7. REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER


    1. A005P2LC01
      B00497S Remove in this Direction

      Disengage the claws to remove the front center ultrasonic sensor retainer as shown in the illustration.