| DTC Code | DTC Name |
|---|---|
| C1647 | G Sensor Failure |
DESCRIPTION
The clearance warning ECU assembly communicates with the yaw rate and acceleration sensor (airbag sensor assembly) circuit via CAN communication, and if it is determined that the yaw rate and acceleration sensor (airbag sensor assembly) is malfunctioning, DTC C1647 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1647 | G Sensor Failure | Yaw rate and acceleration sensor (airbag sensor assembly) malfunction | Vehicle stability control system |
PROCEDURE
CHECK DTC OUTPUT
Using the GTS, check for DTCs according to the prompts on the screen.
Clear the DTCs according to the screen on the GTS.
Recheck for DTCs.
Tech Tips
DTC C1647 is stored when a malfunction signal sent from the vehicle stability control system is detected.
If the malfunctioning part has been repaired or replaced before rechecking for DTCs, DTC C1647 will not be output again.
If DTC C1647 is output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.
| OK |
|---|
| No DTCs are output |
| Result | |||
|---|---|---|---|
|
| OK |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM Click here |
| NG |
|
USE SIMULATION METHOD TO CHECK Click here |