NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A005OPU

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

    2. A005PEJ

      Engage the claws to install the new terminal cover with wire harness to a new radio setting condenser.

      Note


      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If the terminal cover has been deformed during installation, replace the terminal, terminal cover and condenser with new ones.

    3. A005PIJ

      Engage the clamp to temporarily install the radio setting condenser with wire harness.

    4. Install the radio setting condenser with the bolt.

      Torque:
      10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE COVER LH (w/ Cover)

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)

    Click here

  5. INSTALL DECK TRIM REAR COVER

    Click here

  6. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  7. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

    Click here

  8. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  10. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  11. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

  12. INSTALL DECK FLOOR BOX RH (w/ Deck Floor Box)

    Click here

  13. INSTALL SPARE WHEEL CUSHION (w/ Deck Board)

    Click here

  14. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here

  15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  16. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here