QUARTER TRIM SPEAKER INSPECTION

PROCEDURE


  1. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX


    1. Check the resistance.


      1. A001XQFC80
        *a

        Component without harness connected

        (No. 1 Speaker Assembly with Box)

        Measure the resistance according to thevalue(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition

        4 (WF+) - 2 (WF-)

        3 (WF+) - 1 (WF-)

        		 Always 10 kΩ or higher
        1 (WF-) - 2 (WF-) Always Below 1 Ω
        3 (WF+) - 4 (WF+) Always Below 1 Ω

        If the result is not as specified, replace the No. 1 speaker assembly with box.