REAR DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR SPEAKER ASSEMBLY


    1. Check the resistance.


      1. A001TIRC78
        *a

        Component without harness connected

        (Rear Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance (w/o Woofer)
        Tester Connection Condition Specified Condition
        1 (+) - 2 (-) Always 4.0 Ω
        Standard Resistance (w/ Woofer)
        Tester Connection Condition Specified Condition
        1 (+) - 2 (-) Always 6.2 to 9.4 Ω

        If the result is not as specified, replace the rear speaker assembly.