POWER STEERING SYSTEM, Diagnostic DTC:C1567

DTC Code DTC Name
C1567 Error in Matching of ECUs

DESCRIPTION

Based on the steering sensor signal, the power steering ECU assembly determines if the correct type of steering sensor is installed.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
C1567 Error in Matching of ECUs There is a system recognition error

  • Steering sensor (incorrect part)

  • Power steering ECU assembly

 EPS warning light: Comes on Ignition switch ON again -

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly has been replaced, perform assist map writing, rotation angle sensor initialization and torque sensor zero point calibration.

Click here

PROCEDURE


  1. CHECK STEERING SENSOR


    1. Check that the steering sensor complies with the specifications of the vehicle.

      Click here

      OK
      A steering sensor that complies with the specifications of the vehicle is installed.

      Note

      When removing a related part to check it, be sure to follow the appropriate procedures and precautions.

      Tech Tips

      If DTC C1567 is output and parts have not been replaced, replace the power steering ECU assembly as it may have an internal malfunction.

      Result
      Result Proceed to
      OK (for LHD) A
      OK (for RHD) B
      NG C

    A

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    B

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    C

    REPLACE STEERING SENSOR