ELECTRIC PARKING BRAKE ACTUATOR INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY


    1. Check the resistance.


      1. A001XLYC04
        *a

        Component without harness connected

        (Parking Brake Actuator Assembly LH)
        *b Lock
        *c Release

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance (LH Side)
        Tester Connection Parking Brake Actuator Operation

        Battery positive (+) -2 (MRL+)

        Battery negative (-) -1 (MRL-)

        		 Lock

        Battery positive (+) -1 (MRL-)

        Battery negative (-) -2 (MRL+)

        		 Release

        If the result is not as specified, replace the parking brake actuator assembly LH.

    2. Check the resistance.


      1. A001XLYC07
        *a

        Component without harness connected

        (Parking Brake Actuator Assembly RH)
        *b Lock
        *c Release

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance (RH Side)
        Tester Connection Parking Brake Actuator Operation

        Battery positive (+) -2 (MRR+)

        Battery negative (-) -1 (MRR-)

        		 Lock

        Battery positive (+) -1 (MRR-)

        Battery negative (-) -2 (MRR+)

        		 Release

        If the result is not as specified, replace the parking brake actuator assembly RH.