| DTC | Trouble Area | Parking Brake Indicator Light (Red) | Brake System Warning Light (Yellow) | Fail-safe Deactivation Condition |
|---|---|---|---|---|
| C1207 | Neutral position switch circuit malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
| C13A5 | Motor current monitor malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
| C13A6 | Motor open or short circuit malfunction | Normal*1 | Illuminates | After returning to normal condition, turn ignition switch again |
| C13A7 | Actuator assembly malfunction (jamming, spinning, repeated slipping) | Blinks | Illuminates | After returning to normal condition, Clear DTSs |
| C13AA | Electric parking brake high temperature | Blinks | Does not illuminate | After 1 minute |
| C13B0 | ECU malfunction | Normal (flashes when EEPROM malfunction occurs) | Illuminates | After returning to normal condition, turn ignition switch again |
| C13B4 | Electric parking brake switch open or short circuit malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
| P0805 | Clutch stroke sensor data malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
| U0100 | ECM communication malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
| U1103 | Engine stop and start ECU communication malfunction | Normal | Illuminates | After returning to normal condition, turn ignition switch again |
*1: The parking brake indicator light blinks (red) if the electric parking brake switch assembly is pulled or pushed.