FRONT BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT DISC BRAKE PISTON


    1. A005PY6C01
      *a Cloth

      Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.

    2. Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.

      CAUTION:


      • Do not hold the front disc brake cylinder assembly with any part of your hand between the front disc brake cylinder assembly and front disc brake piston.

      • Do not place any part of your hand in front of the front disc brake piston when using compressed air as a severe injury may result.

      A005OT4

      Note

      Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. A005Q8KC03
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protecrive tape, remove the cylinder boot from the front disc brake cylinder assembly.

      Note

      Be careful not to damage the front disc brake cylinder assembly.

  3. REMOVE PISTON SEAL


    1. A005PQAC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder assembly.

      Note

      Do not damage the inner surface or piston seal groove of the front disc brake cylinder assembly.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP


    1. Remove the front disc brake bleeder plug cap from the front disc brake bleeder plug.

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG


    1. Remove the front disc brake bleeder plug from the front disc brake cylinder assembly.