STEERING ANGLE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

PROCEDURE


  1. INSTALL STEERING SENSOR


    1. A001TLTC06
      *a Guide
      *b Pin
      *c Lock Pin

      Align the pins and guides, and engage the claws to install the steering sensor to the spiral cable sub-assembly.

      Note


      • Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly.

      • Do not damage the pins of the spiral cable sub-assembly or guides of the steering sensor.

      • The spiral cable sub-assembly can be rotated up to 30° even when the interlock is engaged. Therefore, make sure that both guides are aligned properly when installing the steering sensor to the spiral cable sub-assembly.

    2. A001SP7

      Remove the lock pin from the steering sensor.

  2. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here