REAR SPEED SENSOR(for AWD) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR SKID CONTROL SENSOR


    1. Install the rear skid control sensor to the rear axle carrier sub-assembly with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    2. A001WUY

      Connect the skid control sensor connector to the skid control sensor.

  2. INSTALL REAR WHEEL

    Click here