VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1419, C1435

DTC Code DTC Name
C1419 Acceleration Sensor Internal Circuit
C1435 Yaw Rate Sensor Internal Circuit

DESCRIPTION

These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area
C1419 Acceleration Sensor Internal Circuit With the +BS terminal voltage between 9.6 and 16.5 V, an acceleration sensor malfunction signal is received from the acceleration sensor. Acceleration sensor (airbag sensor assembly)
C1435 Yaw Rate Sensor Internal Circuit With the +BS terminal voltage between 9.6 and 16.5 V, a yaw rate sensor malfunction signal is received from the yaw rate sensor. Yaw rate sensor (airbag sensor assembly)

PROCEDURE


  1. REPLACE AIRBAG SENSOR ASSEMBLY


    1. Replace the yaw rate and acceleration sensor (airbag sensor assembly).

      Click here

      Tech Tips

      If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END