REAR DIFFERENTIAL CARRIER OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR NO. 1 DIFFERENTIAL SUPPORT

    Click here

  3. REMOVE REAR NO. 2 DIFFERENTIAL SUPPORT

    Click here

  4. REMOVE TRANSMISSION COUPLING ASSEMBLY

    Click here

  5. REMOVE TRANSMISSION COUPLING CONICAL SPRING WASHER

    Click here

  6. REMOVE TRANSMISSION COUPLING SHIM

    Click here

  7. REMOVE DIAPHRAGM OIL SEAL


    1. A001VQJC06
      *1 Diaphragm Oil Seal
      *a Turn
      *b Hold

      Using SST, remove the diaphragm oil seal from the rear differential carrier sub-assembly.

      SST
      09308-10010

  8. INSTALL DIAPHRAGM OIL SEAL


    1. A001U6WC02
      *1 Diaphragm Oil Seal
      *a Distance

      Using SST and a hammer, tap a new diaphragm oil seal into the rear differential carrier sub-assembly until it reaches the standard value.

      SST
      09710-30021   ( 09710-03121 )
      09950-60010   ( 09951-00570 )
      09950-70010   ( 09951-07100 )
      Standard distance
      6.5 to 7.5 mm (0.256 to 0.295 in.) (from the edge of the differential carrier sub-assembly)

      Note


      • Tap the oil seal uniformly so that the oil seal is straight.

      • Do not tap the oil seal in too far.

  9. INSTALL TRANSMISSION COUPLING SHIM

    Click here

  10. INSTALL TRANSMISSION COUPLING CONICAL SPRING WASHER

    Click here

  11. INSTALL TRANSMISSION COUPLING ASSEMBLY

    Click here

  12. INSTALL REAR NO. 1 DIFFERENTIAL SUPPORT

    Click here

  13. INSTALL REAR NO. 2 DIFFERENTIAL SUPPORT

    Click here

  14. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here