PROPELLER SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE EXHAUST PIPE ASSEMBLY

    Click here

  2. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A005OQT

      Remove the 2 clips and front No. 2 floor heat insulator from the vehicle body.

  3. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY


    1. A005OPG

      Remove the 2 bolts and 2 center No. 2 support bearing washers, and disconnect the propeller with center bearing shaft assembly.

    2. A005PGOC01
      *a Matchmark

      Place matchmarks on the differential carrier assembly and propeller with center bearing shaft assembly.

    3. Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the differential carrier assembly.

    4. A005Q2VC01
      *a Matchmark

      Place matchmarks on the transfer assembly and propeller with center bearing shaft assembly.

    5. Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the transfer assembly.