4WD CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL 4WD ECU ASSEMBLY

   
   

   1. Install the 4WD ECU assembly with the bolt.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

   2. Connect the connector.

2. INSTALL REAR SEAT SIDE GARNISH

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here