OIL PAN INSTALLATION

PROCEDURE


  1. INSTALL OIL CLEANER (CVT) MAGNET


    1. A001SI3C01
      *1 Oil Cleaner (CVT) Magnet

      Install the 3 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly as shown in the illustration.

  2. INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY


    1. Clean the transaxle oil (CVT) pan sub-assembly installation surface of the transaxle case.

    2. Install the transaxle oil (CVT) pan sub-assembly and a new transaxle oil pan (CVT) gasket to the transaxle case with the 16 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

    3. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    4. Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

  3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  4. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

  5. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here