CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM, Diagnostic DTC:U0124

DTC Code DTC Name
U0124 Lost Communication with Lateral Acceleration Sensor Module

DESCRIPTION

The ECM receives signals sent from the airbag sensor assembly (yaw rate and acceleration sensor) via CAN communication. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding ECU or sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
U0124 Lost Communication with Lateral Acceleration Sensor Module When the ignition switch is turned ON, there is no communication between the ECM and airbag sensor assembly (yaw rate and acceleration sensor) for 1.25 seconds or more (1 trip detection logic).

  • CAN communication system

  • Airbag sensor assembly (Yaw rate and acceleration sensor)

  • ECM

 Comes on DTC stored

PROCEDURE


  1. CLEAR DTC AND PERFORM ROAD TEST


    1. Clear the DTCs.

      Click here


      Powertrain > Engine and ECT > Clear DTCs

      Tech Tips

      Write down the currently output DTCs before clearing them.

    2. Start the engine and drive the vehicle at a low speed.

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK DTC OUTPUT (DTC U0124)


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


      Powertrain > Engine and ECT > Trouble Codes

    5. Read the DTCs using the GTS.

      Result
      Result Proceed to
      DTC U0124 is not output A
      DTC U0124 is output B

    A

    CHECK FOR INTERMITTENT PROBLEMS Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here