SHIFT AND SELECT LEVER SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE INNER NO. 2 SHIFT LEVER


    1. A001VIA

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the inner No. 2 shift lever.

  2. REMOVE RELEASE HEAD STRAIGHT PIN


    1. A001TLA

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the select stopper block.

    2. A001UNR

      Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the front inner shift lever.

    3. A001XYV

      Turn the release head clockwise.

    4. A001T65

      Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.

  3. REMOVE SELECT STOPPER BLOCK


    1. A001U0H

      Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.

      Tech Tips

      Check the orientation of the front inner shift lever, release head torsion spring, release head and select stopper block.