SPEED SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR

   Note

   When reusing the transmission revolution sensor, first inspect the O-ring. If the O-ring is damaged, replace the transmission revolution sensor with a new one.

   
   

   1. Apply gear oil to the O-ring.

   2. Install the transmission revolution sensor with a new bolt.

      Torque:

      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

   3. Connect the connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. INSTALL NO. 1 AIR CLEANER INLET

   Click here

5. INSTALL RADIATOR COVER

   Click here