MILLIMETER WAVE RADAR SENSOR INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Note

If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.

PROCEDURE


  1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

    Note

    If the front bumper assembly or radiator grill has been replaced, check that the beam axis change mechanism is at the standard position (centered).


    1. A001VBWC02
      B00495X Bolt
      B0049DE Screw

      Engage the 2 guides.

    2. Install the millimeter wave radar sensor assembly with the 2 bolts and screw.

      Torque:
      Bolt
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

  2. INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET


    1. Engage the guide.

    2. Install the No. 1 millimeter wave radar sensor bracket with the 2 bolts.

      Torque:
      Bolt
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. ADJUST MILLIMETER WAVE RADAR SENSOR


    1. When the millimeter wave radar sensor assembly or No. 1 millimeter wave radar sensor bracket is replaced with a new one, adjustment of the radar sensor beam axis must be performed.

      Click here