DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:U0100, U0125, U0126, U0129

DTC Code DTC Name
U0100 Lost Communication with ECM / PCM "A"
U0125 Lost Communication with Yaw Rate Sensor Module
U0126 Lost Communication with Steering Angle Sensor Module
U0129 Lost Communication with Brake System Control Module

DESCRIPTION

The millimeter wave radar sensor assembly communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0100 Lost Communication with ECM / PCM "A"

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the ECM and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the ECM and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.

  • CAN communication system

  • ECM

  • Millimeter wave radar sensor assembly
U0125 Lost Communication with Yaw Rate Sensor Module

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the yaw rate sensor and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the yaw rate sensor and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.

  • CAN communication system

  • Yaw rate sensor (airbag sensor assembly)

  • Millimeter wave radar sensor assembly
U0126 Lost Communication with Steering Angle Sensor Module

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the steering sensor and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the steering sensor and the millimeter wave radar sensor assembly is detected for approximately 1 second or more.

  • CAN communication system

  • Steering sensor

  • Millimeter wave radar sensor assembly
U0129 Lost Communication with Brake System Control Module

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the skid control ECU (brake actuator assembly) and the millimeter wave radar sensor assembly is detected for approximately 2.5 seconds or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the skid control ECU (brake actuator assembly) and the millimeter wave radar sensor assembly is detected for approximately 2.5 seconds or more.

  • CAN communication system

  • Skid control ECU (brake actuator assembly)

  • Millimeter wave radar sensor assembly

PROCEDURE


  1. CHECK FOR DTCs (RADAR CRUISE 2)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise2 > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.


      1. Turn the ignition switch to ON.

      2. Turn the dynamic radar cruise control system on using the cruise control main switch (ON/OFF button).

      3. w/ Full-speed range following function: Drive the vehicle at 5 km/h (3 mph) or more for 5 seconds or more.

        w/o Full-speed range following function: Drive the vehicle at 36 km/h (22 mph) or more for 5 seconds or more.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise2 > Trouble Codes
      Result
      Result Proceed to
      DTC U0100, U0125, U0126 and U0129 are not output A
      DTC U0100, U0125, U0126 or U0129 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here