CRUISE CONTROL SYSTEM(for 8NR-FTS), Diagnostic DTC:U012287

DTC Code DTC Name
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message

DESCRIPTION

The ECM receives signals from the skid control ECU (brake actuator assembly) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message While the vehicle speed is 40 km/h (25 mph) or more and the cruise control main switch (ON/OFF button) is on, signals cannot be received from the skid control ECU (brake actuator assembly) for 2.65 seconds or more.

  • CAN communication system

  • ECM

  • Skid control ECU (brake actuator assembly)

CAUTION / NOTICE / HINT

Tech Tips

Refer to troubleshooting in CAN Communication System.

Click here

PROCEDURE


  1. CHECK FOR DTCs (CRUISE CONTROL SYSTEM)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.


      1. Drive the vehicle at a speed for which cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON/OFF button).

      3. Push the cruise control main switch to -SET to begin control of vehicle speed using the cruise control system.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC U012287 is not output A
      DTC U012287 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here