IGNITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING COLUMN ASSEMBLY

    Click here

  2. REMOVE UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY

    Click here

  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY


    1. A001VXS

      Remove the 2 screws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.

      Note


      • After removing the ignition or starter switch assembly, keep the upper steering column bracket assembly in its original orientation.

      • If the upper steering column bracket assembly is turned sideways or turned upside-down, the component parts of the upper steering column bracket assembly could fall out.