THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A001SCTC01
      *a Jiggle Valve
      *b 10°

      Install the thermostat to the water inlet housing.

      Tech Tips

      The jiggle valve may be set within 10° on either side of the prescribed position.

  2. INSTALL WATER INLET


    1. Install the water inlet with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here

  5. INSTALL NO. 1 ENGINE UNDER COVER