VACUUM REGULATING VALVE REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

3. REMOVE WATER GUARD PLATE LH

   Click here

4. REMOVE COWL BODY MOUNTING REINFORCEMENT LH

   Click here

5. REMOVE COWL BODY MOUNTING REINFORCEMENT RH

   Click here

6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

   Click here

7. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

8. REMOVE VACUUM REGULATING VALVE ASSEMBLY

   
   
   1. 

      *1	No. 2 Vacuum Transmitting Hose
      *2	No. 3 Vacuum Transmitting Hose

      Disconnect the vacuum regulating valve assembly connector.

   2. Disconnect the No. 2 vacuum transmitting hose and No. 3 vacuum transmitting hose from the vacuum regulating valve assembly.

   3. Remove the 2 bolts and vacuum regulating valve assembly from the No. 2 vacuum switching valve bracket.