FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

   2. Install the fuel pressure regulator assembly to the fuel suction tube with pump and gauge assembly.

      Note

      Make sure that the O-rings are not cut or pinched during installation.

   3. Install the No. 3 fuel suction support to the fuel suction tube with pump and gauge assembly.

2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here