FUEL PUMP ECU INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Install the fuel pump control ECU assembly with the 2 bolts.

      Torque:

      10.5 N*m  { 107 kgf*cm, 8 ft.*lbf }

   2. Connect the fuel pump control ECU assembly connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)

   Click here

4. INSTALL DECK TRIM REAR COVER

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click here

7. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   
   

   1. Install the rear door opening trim weatherstrip LH.

9. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

   Click here

10. INSTALL SPARE WHEEL CUSHION (w/ Deck Board)

    Click here

11. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

13. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

14. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

15. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

16. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here