FUEL PUMP(for AWD) REASSEMBLY

PROCEDURE

1. INSTALL FUEL PUMP

   Tech Tips

   Perform "Inspection After Repair" after replacing the fuel pump.

   Click here

   
   

   1. Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

   2. Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump.

   3. Engage the 5 claws to install the fuel pump to the fuel filter.

      Note

      
      

      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

   4. Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.

   5. Apply gasoline to a new O-ring. Then install the O-ring to the jet pump.

   6. Engage the 2 claws and install the fuel filter and the fuel pump to the No. 1 fuel sub-tank.

      Note

      Do not apply excessive force to the tube or No. 1 fuel suction support.

   7. 

      Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the No. 1 fuel sub-tank.

   8. Connect the fuel pump harness connector.

2. INSTALL FUEL SENDER GAUGE ASSEMBLY

   Click here