KNOCK SENSOR INSTALLATION

Info Added 2017-10-06

PROCEDURE


  1. INSTALL KNOCK SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the knock sensor.

    Click here


    1. A001SITC01
      B0049DE Upper of Vehicle

      Install the knock sensor to the cylinder block sub-assembly with the bolt so that the knock sensor installation position is as shown in the illustration.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note


      • If the knock sensor has been struck or dropped, replace it.

      • Make sure that the knock sensor is in the correct position.

    2. Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here

  3. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the knock sensor.

      Click here