ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket to the engine oil temperature sensor.

    2. A001W4LE01

      Using SST, install the engine oil temperature sensor to the timing chain cover sub-assembly.

      SST
      09817-33191
      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Connect the engine oil temperature sensor connector.

  2. INSPECT FOR OIL LEAK

    Click here

  3. CHECK ENGINE OIL LEVEL

    Click here

  4. INSTALL REAR ENGINE UNDER COVER RH

    Click here

  5. INSTALL FRONT WHEEL RH

    Click here