MASS AIR FLOW METER INSPECTION

PROCEDURE


  1. INSPECT MASS AIR FLOW METER


    1. A001T07C03
      *a Thermistor

      Perform a visual check for any foreign matter on the temperature sensor (thermistor) of the mass air flow meter shown in the illustration.

      OK
      There is no foreign matter.

      If the result is not as specified, replace the mass air flow meter.

    2. A001Y3MC05
      *a

      Component without harness connected

      (Mass Air Flow Meter)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (THA) - 2 (E2G) -20°C (-4°F) 13.6 to 18.4 kΩ
      20°C (68°F) 2.21 to 2.69 kΩ
      60°C (140°F) 0.49 to 0.67 kΩ

      If the result is not as specified, replace the mass air flow meter.