NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates, heat the vehicle body, back door outside garnish and name plates using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)

  • Back Door Outside Garnish

  • Name Plate

 20 to 30°C (68 to 86°F)

CAUTION:


  • Do not touch the heat light and heated parts, touching the heat light may result in burns.

  • Touching heated parts for a long time may result in burns.

A005OUCC23
*a Heated Part
*b Heat Light

Note

Do not heat the vehicle body, back door outside garnish or name plate excessively.

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 1 back door emblem.

    3. Remove the release paper from the No. 1 back door emblem.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. A005ON5C01
      *a Location Pin

      Engage the location pins and install the No. 1 back door emblem as shown in the illustration.

  2. INSTALL NO. 4 BACK DOOR NAME PLATE (for AWD)


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 4 back door name plate.

    3. Remove the release paper from the No. 4 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 4 back door name plate as shown in the illustration.

      A005OCIC01
      *a Reference Values - -
      Standard Measurement
      Area Measurement Area Measurement
      A 115.9 mm (4.56 in.) B 22.4 mm (0.88 in.)
      C 23.9 mm (0.94 in.) - -

  3. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 1 back door name plate.

    3. Remove the release paper from the No. 1 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 1 back door name plate as shown in the illustration.

      A005Q77C01
      *a Reference Values - -
      Standard Measurement
      Area Measurement Area Measurement
      A 57.0 mm (2.24 in.) B 85.5 mm (3.37 in.)
      C 83.2 mm (3.28 in.) - -

  4. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish surface.

      2. Remove any remaining double-sided tape from the back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the back door outside garnish and a new No. 2 back door name plate.

    3. Remove the release paper from the No. 2 back door name plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 back door name plate as shown in the illustration.

      A005PBCC01
      *a Reference Values - -
      Standard Measurement
      Area Measurement Area Measurement
      A 65.1 mm (2.56 in.) B 113.7 mm (4.48 in.)