Info Added 2017-10-06
PROCEDURE
REMOVE RADIATOR GRILLE
REMOVE FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)
REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)
REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
REMOVE NO. 5 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
w/ Simple Intelligent Parking Assist System:
Disengage the clamps to remove the No. 5 engine room wire.
w/o Simple Intelligent Parking Assist System:
Disengage the clamps to remove the No. 5 engine room wire.
REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)
REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)
Tech Tips
Use the same procedure as for the LH side.
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Tech Tips
Use the same procedure as for the LH side.
REMOVE WASHER HOSE (w/ Headlight Cleaner System)
Disengage the clamps to remove the washer hose.
REMOVE FRONT BUMPER EXTENSION LH
Disengage the claws and guide to remove the front bumper extension LH.
REMOVE FRONT BUMPER EXTENSION RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
Remove the 2 screws.
Disengage the guide to remove the fog light assembly LH.
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT COVER LH (w/ Fog Light)
Remove the 3 screws and fog light cover LH.
REMOVE FOG LIGHT COVER RH (w/ Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FOG LIGHT COVER LH (w/o Fog Light)
Remove the 3 screws and fog light cover LH.
INSTALL FOG LIGHT COVER RH (w/o Fog Light)
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH
Remove the screw and clip.
|
Remove in this Direction |
Disengage the claws to remove the front bumper side mounting bracket LH.
REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE FRONT FENDER LINER RETAINER
Disengage the claws to remove the front fender liner retainer.
Tech Tips
Use the same procedure for the opposite side.
REMOVE FRONT BUMPER HOLE COVER
Disengage the claws.
Disengage the hook to remove the front bumper hole cover.
REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
for Extension Mounting Bracket Type A:
Remove the 2 screws.
|
Remove in this Direction |
Disengage the claws to remove the front bumper extension mounting bracket as shown in the illustration.
for Extension Mounting Bracket Type B:
Remove the 2 screws.
|
Remove in this Direction |
Disengage the claws to remove the front bumper extension mounting bracket as shown in the illustration.
REMOVE INNER RADIATOR GRILLE
|
Remove in this Direction |
Disengage the claws to remove the inner radiator grille.
REMOVE FRONT BUMPER LOWER COVER
| *a | Outside Moulding Retainer |
| *b | Clip |
| *c | Grommet |
Remove the 8 grommets.
Remove the 2 clips and 8 outside moulding retainers.
Disengage the claws and guides to remove the front bumper lower cover.
REMOVE NO. 1 RADIATOR GRILLE RETAINER
|
Remove in this Direction |
Disengage the claws to remove the No. 1 radiator grille retainer as shown in the illustration.
REMOVE NO. 1 RADIATOR TO SUPPORT SEAL
Disengage the wire harness clamp and remove the 2 clips.
|
Remove in this Direction |
Remove the No. 1 radiator to support seal as shown in the illustration.
REMOVE FRONT BUMPER ENERGY ABSORBER
|
Remove in this Direction |
Remove the front bumper energy absorber as shown in the illustration.
REMOVE LOWER FRONT BUMPER ABSORBER
|
Remove in this Direction |
Remove the lower front bumper absorber as shown in the illustration.
REMOVE FRONT BUMPER REINFORCEMENT
Disengage the wire harness clamps.
Remove the 6 bolts and front bumper reinforcement.
REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
Remove the 4 bolts and front side member bracket sub-assembly LH.
REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE NO. 2 FRONT BUMPER REINFORCEMENT
Remove the 2 nuts and No. 2 front bumper reinforcement.
REMOVE FRONT BUMPER BRACKET LH
Remove the 4 bolts and front bumper bracket LH.
REMOVE FRONT BUMPER BRACKET RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE NO. 1 RADIATOR AIR GUIDE LH
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claw and guide to remove the No. 1 radiator air guide LH as shown in the illustration.
REMOVE NO. 1 RADIATOR AIR GUIDE RH
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claw and guide to remove the No. 1 radiator air guide RH as shown in the illustration.
REMOVE FRONT BUMPER SIDE RETAINER LH
| *a | Bolt |
| *b | Screw |
Remove the bolt.
Remove the screw.
|
Remove in this Direction |
Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.
REMOVE FRONT BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure as for the LH side.