LICENSE PLATE LIGHT BULB REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER


    1. A001T99C01
      *a Protective Tape
      B00497S Remove in this Direction

      Using a screw driver with its tip wrapped in protective tape, disengage the claws to remove the No. 2 back door service hole cover as shown in the illustration.

  2. REMOVE LICENSE PLATE LIGHT BULB


    1. A001V2SC01
      B00497S Remove in this Direction

      Turn the license plate light socket and wire with the license plate light bulb as shown in the illustration to disconnect them as a unit.

    2. A001SK1C01
      B00497S Remove in this Direction

      Remove the license plate light bulb from the license plate light socket and wire as shown in the illustration.