| DTC Code | DTC Name |
|---|---|
| B124B | Automatic High Beam System |
DESCRIPTION
This DTC is stored when the main body ECU (multiplex network body ECU) detects malfunctions in the automatic high beam system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B124B | Automatic High Beam System | Malfunction in automatic high beam system |
|
- |
WIRING DIAGRAM
| *1 | Forward Recognition Camera |
| *2 | Main Body ECU (Multiplex Network Body ECU) |
| *3 | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
Confirm that there are no CAN communication system malfunctions before performing the following inspection.
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*1
*1: w/ Entry and Start System
Tech Tips
If the forward recognition camera stores a DTC for a malfunction of any of the following, this DTC will be stored simultaneously.
Wheel sensor malfunction
Yaw rate sensor malfunction
Steering sensor malfunction
CAN communication lost
PROCEDURE
CHECK FOR DTC (HEALTH CHECK)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: System Select / Health Check.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO OTHER DTC CHART |
| A |
|
CHECK FORWARD RECOGNITION CAMERA SYSTEM
Check if a dynamic radar cruise control system, lane departure alert system and pre-collision system warning message is displayed on the combination meter assembly.
| OK |
|---|
| No dynamic radar cruise control system, lane departure alert system and pre-collision system warning messages are displayed. |
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| B |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| C |
|
GO TO FORWARD RECOGNITION CAMERA SYSTEM Click here |