MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 TURBO PRESSURE SENSOR


    1. A001X7D

      Disconnect the No. 1 turbo pressure sensor connector.

    2. Remove the bolt and No. 1 turbo pressure sensor from the intercooler assembly.

      Note

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

  2. REMOVE NO. 2 TURBO PRESSURE SENSOR


    1. A001TML

      Disconnect the No. 2 turbo pressure sensor connector.

    2. Remove the bolt and No. 2 turbo pressure sensor from the intake manifold.

      Note

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.