CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Install the crankshaft position sensor to the timing chain cover assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • If the crankshaft position sensor has been struck or dropped, replace it.

      • If reusing the crankshaft position sensor, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or moved out of place when installing the crankshaft position sensor.

   2. Connect the crankshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

   Click here

3. INSTALL REAR ENGINE UNDER COVER RH

   Click here

4. INSTALL FRONT WHEEL RH

   Click here