SFI SYSTEM PARTS LOCATION
ILLUSTRATION
| *1 | BRAKE ACTUATOR ASSEMBLY (SKID CONTROL ECU) | *2 | FUEL PUMP |
| *3 | HEATED OXYGEN SENSOR | *4 | MASS AIR FLOW METER |
| *5 | PARK / NEUTRAL POSITION SWITCH | *6 | ECM |
| *7 | NO. 1 ENGINE ROOM RELAY BLOCK - NO.1 INTEGRATION RELAY (EFI-MAIN RELAY, IG2 NO.1 RELAY) - ST RELAY - EFI-MAIN NO.1 FUSE - ST FUSE - J/B-B FUSE - ETCS FUSE - IGN/INJ FUSE - EFI-MAIN NO.1 RELAY - EFI NO.3 FUSE - VLVMATIC FUSE - ECU-IG2 NO.1 FUSE - C/OPN RELAY - ECU-B NO.3 FUSE - EFI NO.2 FUSE - IG2-MAIN FUSE - EFI NO.2 FUSE |
*8 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY |
ILLUSTRATION
| *1 | CONTINUOUSLY VARIABLE VALVE LIFT CONTROLLER ASSEMBLY | *2 | ENGINE COOLANT TEMPERATURE SENSOR |
| *3 | FUEL INJECTOR ASSEMBLY | *4 | KNOCK SENSOR |
| *5 | MANIFOLD ABSOLUTE PRESSURE SENSOR | *6 | PURGE VSV |
| *7 | THROTTLE BODY ASSEMBLY | *8 | IGNITION COIL ASSEMBLY |
| *9 | CAMSHAFT POSITION SENSOR (for INTAKE CAMSHAFT) | *10 | CAMSHAFT POSITION SENSOR (for EXHAUST CAMSHAFT) |
ILLUSTRATION
| *1 | AIR FUEL RATIO SENSOR | *2 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (forINTAKE CAMSHAFT) |
| *3 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for EXHAUST CAMSHAFT) | *4 | CRANKSHAFT POSITION SENSOR |
| *5 | ENGINE OIL TEMPERATURE SENSOR | - |
ILLUSTRATION
| *A | w/ Entry and Start System | *B | w/o Entry and Start System |
| *1 | ACCELERATOR PEDAL SENSOR ASSEMBLY | *2 | ENGINE SWITCH |
| *3 | IGNITION OR STARTER SWITCH ASSEMBLY | *4 | STOP LIGHT SWITCH ASSEMBLY |
| *5 | DLC3 | *6 | COMBINATION METER ASSEMBLY |
| *7 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY - AM2 FUSE - STOP FUSE - ECU-IG2 NO.3 FUSE - IG2-NO.2 RELAY |
*8 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
| *a | Refer to the Service Bulletin for the installation position of the part. | - | - |