RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MAIN RELAY (EFI MAIN)


    1. A001WDCN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI main relay (EFI MAIN).

  2. INSPECT MAIN RELAY (EFI MAIN NO. 2)


    1. A001WDCN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the No. 2 EFI main relay (EFI MAIN NO. 2).

  3. INSPECT EFI INJECTION RELAY (D INJ)


    1. A001WDCN01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the EFI injection relay (D INJ).