BACK-UP LIGHT BULB REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR SERVICE HOLE COVER LH


    1. A001V20C01
      *a Protective Tape
      B00497S Remove in this Direction

      Using a screw driver with its tip wrapped in protective tape, disengage the claws to remove the back door service hole cover LH as shown in the illustration.

  2. REMOVE BACK UP LIGHT BULB


    1. A001SPQC01
      B00497S Remove in this Direction

      Turn the back up light socket and wire with the back up light bulb as shown in the illustration to disconnect them as a unit.

    2. A001YB1C01
      B00497S Remove in this Direction

      Remove the back up light bulb from the back up light socket and wire as shown in the illustration.